Get Your Quote - Italian Granite Company Italian Granite Company

Step 1: Filter your selection

Step 2: Select your colour

Granite Worktops
NEXT

Quartz Worktops
NEXT

Dekton Worktops
NEXT

Step 3: Enter your data

* Mandatory information we need for your quote

Templating and Fitting *

Please provide us with your county so we can give you an indication of the templating and fitting cost. If your county is not listed an additional fee will be applicable, please contact us at sales@italiangranitecompany.com for more information.

Worktop length and width: *

Add the length and width of each individual piece of worktop you need. You will need the length and width, measured in mm, for each piece. Don’t forget to include breakfast bars, islands, worktops in any other rooms such as utilities or bathrooms.

Measurements need to be in mm. 1 metre = 1000mm

1st

2nd

3rd

4th

5th

6th

7th

8th

9th

10th

+ ADD ANOTHER WORKTOP

Total Area = 0 sq/m

Polished edges: *

Any edges that can be seen will need to be polished, so this includes the long sides and any short sides. You don’t need to measure the edges of the sinks here, that’s done as a later stage.

Measurements need to be in mm. 1 metre = 1000mm

Total length

Edge detail:

We offer 5 types of edge detail for your worktops, select from the drop down list to see the different styles.

Choose your edge detail

Total length

Upstands:

These are optional, but give a quality finish to your worktop and kitchen. Like your worktops, you will need to measure the length of each piece and enter the total required. Your quote will be based on 100mm high, but if you need a different size we can make adjustments to your order at templating.♱

Measurements need to be in mm. 1 metre = 1000mm

Total length

Drainer grooves:

(1 Set = 5 Grooves)
These are optional, but ideal for undermounted sinks to drain excess water from your worktop. Your quote will include 5 straight grooves to either the left or right of your sink. If you have a different requirement we can make adjustments to your order at templating.♱
Please note: drainer grooves aren’t an option for Dekton worktops

(1 Set = 5 Grooves)

Undermounted sink cut out:

Enter the number of sink cut outs you need for an undermounted sink. We will polish the edges that are visible will be polished. A sink cut out is optional as you may be ordering worktops that don’t include a sink.

Overmounted sink cut out:

Enter the number of sink cut outs you need for an overmounted sink. This type of sink covers the edges so the edges won’t be polished. A sink cut out is optional as you may be ordering worktops that don’t include a sink.

Hob cutout:

Enter the number of hob cut outs you need, the edges won’t be polished as the hob covers them. A hob cut out is optional as you may be ordering worktops that don’t include a hob.

Tap hole:

Enter the number of tap holes required. Please note that if your tap requires 2 holes for hot and cold pipes, please enter 2. Tap holes are optional, you may be ordering worktops that don’t need a tap hole.

Pop up socket:

Enter the number of pop up sockets required, they are optional.

♱Please note that this may effect the final price, any difference will be notified before fitting.